YingYun Hardware · Component manufacturing
Hospital Bed Parts
Hospital bed parts and semi-finished components for medical equipment manufacturers and bed assembly factories. Source catalogue models in bulk, or send a drawing or sample for a custom component.
Bulk orders & OEM · Assembly fit checks · Prepare an enquiry
Choose Your Component
Start with the part family. Each category leads to model references and individual product pages; check the selected version against your assembly drawing before requesting a quotation.
Stamped Bed Panels
Four-section, curled-edge, strip and split-leg panel references for bed platforms.
Selection checks: Panel width, section layout, sheet thickness and welded or unwelded supply.
Bed Metal Parts
Mounting brackets, support plates, connecting ears, linkage arms, hooks and sleeves.
Selection checks: Hole positions, mating faces, orientation, material and finish.
Bed Side Rails
Folding tube, aluminium-alloy and ABS side rail configurations.
Selection checks: Rail dimensions, fixing points, locking arrangement and included fittings.
Cranks & Drive Parts
Manual crank assemblies, universal joints and hexagonal shafts.
Selection checks: Shaft connections, mounting interface and mechanism configuration.
Hospital Bed Casters
Single-wheel, twin-wheel and central-locking caster references.
Selection checks: Wheel size, fitting dimensions, brake type and locking function.
Head & Foot Boards
ABS, wood-grain ABS and stainless steel bed-end board references.
Selection checks: Board dimensions, frame connectors and the contents of each set.
IV Poles & Stands
Two-hook and four-hook IV poles and stand configurations.
Selection checks: Tube dimensions, hook arrangement and receiving socket or base.
Need to identify where a part belongs? See the assembly parts guide.
Start with a Part Reference
Use the model number in your enquiry so our factory can identify the exact catalogue reference.

Four-Section Bed Panel
900 mm · Model: YY-4BP01

Motor Mounting Bracket A
Model: YY-000472

Base Support Plate
Model: YY-00031

U-Shaped Rocker-Arm Connector
Model: YY-000055
How Are You Buying?
Buying for another industry? Custom hardware and sheet metal fabrication is a separate drawing-based service for applications across industries.
Compare Component Specifications
Hospital bed parts are the individual platform, mounting, movement and accessory components purchased for bed assembly. Use the catalogue family to find a reference, then turn its published information into a component-specific purchasing specification.
| Component family | Published catalogue examples | Purchasing decision |
|---|---|---|
| Stamped bed panels | Steel is listed on the 840 mm and 900 mm four-section references; those records list 0.8 mm and 0.9 mm respectively. | Compare the named model, section layout, frame connections and supplied stage. |
| Metal fittings | Selected brackets and connecting parts list iron at 3 mm; the drainage hook YY-000321 separately lists zinc plating. | Specify material, thickness and finish for each fitting rather than applying one record across the range. |
| Side rails | The catalogue includes iron, aluminium-alloy and ABS combinations, with different arrangements and set contents. | Confirm the rail version, mounting points, operating envelope and included fittings. |
| Manual crank parts | ABS-and-iron, iron and stainless steel references are listed as separate components. | Confirm the crank, joint, shaft and mounting scope against the actual mechanism. |
| Casters | Listed references include TPR, PP/TPR and a 304 stainless steel/TPR caster. | Specify the model, wheel size, mounting interface and brake or locking version. |
| Head & foot boards | ABS, wood-grain ABS and 304 stainless steel references are available in the current catalogue. | Match the board outline and connection; confirm the pieces and fittings in the ordered set. |
| IV poles & stands | The current records list 201/304 stainless steel and 16/19 mm outer-tube options. | State the ordered material/tube combination and confirm the receiving socket or base. |
These are examples from existing product records. They do not define every variant in the family. Open the relevant category to compare named models and their listed specifications.
Build the Assembly Parts List
Organize related components by the interfaces they share. Use the receiving assembly drawing to confirm the connection. Browse our hospital bed parts solutions to identify parts and interfaces to include in the same enquiry.

Platform & Support Parts
Panel sections + connecting ears, fixing parts and supports. Show the panel layout, hinges, joining positions and the required welding stage.
Manual Adjustment Parts
Cranks, universal joints and shafts + mounting seats and linkage fittings. Define each receiving connection and list separate items in the enquiry.
Frame Attachment Parts
Casters, bed-end boards and IV poles have their own mounting interfaces. Identify sleeves, hooks, seats or locking fittings as separate requirements where needed.
Specify the Supply Stage
Semi-finished hospital bed parts need a clear handover point between our manufacturing work and your assembly line. See the semi-finished parts supply solution for the fabrication, finishing and assembly details to specify before requesting a quote.
Loose Components
List each panel section or fitting with its own reference, quantity and drawing revision. Identify joining or assembly operations your factory will complete.
Defined Fabrication
For a welded or fabricated requirement, show the parts and joints included, the inspection reference and the dimensions that apply after fabrication.
Agreed Surface Condition
Specify the required surface condition for the actual material and component. Confirm whether finishing operations are included rather than assuming every catalogue photo shows the quoted finish.
Drawing review, sample requirements and the agreed supplied condition should refer to the same revision. Prepare a drawing package or review semi-finished parts requirements.
Check the Assembly Fit
A similar appearance does not establish that two parts fit the same assembly. Use the receiving frame and mating components as the reference when selecting hospital bed spare parts or new production components.
For a multi-component order, send a bill of materials with a separate reference, quantity and drawing revision for each item. Mark the matching panel, bracket, shaft or frame connection on the assembly drawing.
Confirm Before Batch Supply
Geometry: overall dimensions, hole spacing, fixing points and mating faces.
Configuration: panel sections, rail operation, crank connection or caster locking function.
Supply stage: loose parts, welded or unwelded components, and finish as agreed.
Approval reference: controlling drawing revision and agreed sample or part specification.

From Metal to Component
YingYun is a hardware manufacturer in Zhongshan, Guangdong. Our hospital bed parts work is supported by stamping and sheet metal processing, with laser cutting, CNC bending, drilling, welding and spraying in the manufacturing scope.
Define which operations your factory needs us to complete and which stages remain in your own assembly process. Material, finish and dimensional requirements are reviewed against the selected part or drawing.
Prepare a Parts Enquiry
1. Identify the Parts
List catalogue model numbers or attach a marked drawing. For a mixed order, provide one line per component.
2. Define the Batch
State quantities by part, the required supplied condition, destination and delivery schedule.
3. Agree the Specification
Confirm interfaces, material, finish, sample requirements and order terms with our factory before production.
Attach one PDF, JPG or PNG up to 10 MB in the form below. For CAD files, a bill of materials or multiple drawings, email lily@yingyunmic.com.
Parts Sourcing Questions
Can I order several component types together?
Send a parts list with the model and quantity for each item. We will confirm the selected configurations, supply scope and order terms for the requested batch.
Can you manufacture from a drawing or sample?
Yes. Hospital bed component enquiries can be reviewed from a drawing or sample reference. Include the material, finish, critical dimensions and required quantity. Any sample-based dimensions need to be agreed before manufacture.
Do you supply semi-finished parts?
Semi-finished hospital bed components are part of our supply focus. State whether you need loose, welded or unwelded parts and which finishing operations are required. The supplied condition is confirmed for the actual component.
How do I confirm a replacement part?
Provide the original part reference, dimensions, mounting details and clear photographs or drawings. Select by the confirmed interface and specification; a catalogue photo alone is insufficient to establish compatibility.
What are the MOQ, price and lead time?
Request these against the selected model or drawing, quantity, material, finish and delivery destination. Custom tooling, sampling and production requirements are reviewed as part of the quotation.
TALK DIRECTLY WITH OUR FACTORY
Request a Factory Quote
Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.
For a custom version, include the drawing revision, material, finish and supplied condition.
Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.









