Hospital Bed IV Pole Selection
In this guide Have a drawing or a batch requirement? Separate the pole from the stand Hospital bed IV poles and IV stands are related products with different mounting arrangements. Identify whether your purchase requirement is a pole for a receiving bed assembly or a…

Separate the pole from the stand
Hospital bed IV poles and IV stands are related products with different mounting arrangements. Identify whether your purchase requirement is a pole for a receiving bed assembly or a stand supplied in the configuration shown by the catalogue. State the application and connection needed before requesting a quotation.
The current category contains two-hook and four-hook IV pole references and a four-hook IV stand. Use the complete product name and model to identify the intended item. A photograph can support the enquiry, but the mounting and supplied-condition details still need confirmation.
Compare two-hook and four-hook versions
The hook count describes one aspect of the selected reference. Compare the pole construction, dimensions and connection arrangement as listed for the actual model. Do not assume that a four-hook pole has the same mounting interface as another pole solely because they serve a similar application.
State any project-specific requirements for the assembly and have them reviewed for the proposed version. The product name does not establish an allowable load or a requirement for the finished equipment. Use confirmed component specifications and the drawing approved for the order.
Match the receiving sleeve
For a bed-mounted IV pole, identify the receiving sleeve or other connection used by the frame. Mark the relevant diameters, engagement dimensions, orientation and fixing details on the drawing. Include the mating-part information when the connection depends on a separately supplied fitting. Use this IV pole mounting sleeve reference as a starting point when comparing the receiving connection with your assembly drawing.
The IV pole mounting sleeve in the metal parts catalogue is a separate component reference. Confirm whether your order includes the pole, the sleeve or both. Do not treat a general enquiry for a holder, mount or bracket as a specification for a particular sleeve geometry.
Define the delivered assembly
Confirm which parts are assembled before delivery and which your factory will install. Specify the surface condition and any packing arrangement needed for the next production stage. Keep the chosen pole or stand model attached to its dimensions and included-part list.
If the required connection differs from an existing reference, provide a drawing or sample for review. Explain the changes instead of asking for an unspecified universal fit. Our factory will review the manufacturing scope and the intended supplied condition for the requested configuration.
Prepare the batch requirement
A useful enquiry states the pole or stand reference, hook count, quantity, mounting information and required delivery condition. List separate fittings on their own lines. Provide the drawing revision and identify any dimensions that still need confirmation before a sample or repeat batch can be approved.
Start with IV poles and stands and review IV pole sleeves and other hospital bed metal fittings where required. The OEM drawing checklist explains how to prepare mating-interface information for a factory enquiry.
TALK DIRECTLY WITH OUR FACTORY
Request a Factory Quote
Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.
For a custom version, include the drawing revision, material, finish and supplied condition.
Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.



