Home / Guides

Hospital Bed Head and Foot Boards

In this guide Have a drawing or a batch requirement? Identify the board family Hospital bed headboards and footboards may also be described as head and foot boards, end boards or head and foot panels. Identify the complete pair or individual part required for your…

Wood-Grain ABS Head & Foot Boards

Identify the board family

Hospital bed headboards and footboards may also be described as head and foot boards, end boards or head and foot panels. Identify the complete pair or individual part required for your assembly and include the catalogue model in the enquiry. These names do not establish a common mounting standard.

Our category includes ABS, wood-grain ABS, stainless steel and children’s bed board references. Compare the listed configuration and the receiving frame drawing. The appearance of the board is only one part of the selection; its connection to the frame must also be reviewed.

Distinguish similar ABS references

The two ABS head and foot board entries use YY-HB01 and YY-HB02. Their published specifications include a 900 mm reference width and a two-piece set. Matching that reference width does not establish that the two versions have identical connections or can replace one another.

Send the exact model and a photograph or product link so our factory can confirm the intended version. Review the supplied dimensions and connection details for that version. Keep the headboard and footboard requirements identifiable if your order combines different configurations.

Check mounting and joining parts

Mark the position and geometry of the frame connections on your drawing. Include the mating hooks, hook seats or other fittings used by the receiving assembly. Identify any connection parts that your factory supplies so the quotation does not assume they are included with the boards. The head and footboard mounting solution groups the board and mounting fittings that should be checked against the receiving frame.

Board dimensions and mounting dimensions need separate confirmation. A reference width describes the component envelope; the mating connection determines how it joins the frame. Where a drawing or measurement is missing, request clarification before approving a sample or batch.

Specify material and supplied condition

Choose the material and finish against the selected catalogue record. Do not transfer the material of a stainless steel board to an ABS model or assume every decorative surface has the same construction. Explain any colour, surface or configuration change as a custom requirement for review.

Confirm the set quantity, included hardware and packing requirements for delivery to your assembly plant. If you are sourcing a children’s bed head and foot board, identify that specific assembly and model. The component listing does not substitute for the design and acceptance review of the complete assembly.

Send an identifiable factory enquiry

Provide the full board name, model, quantity, drawing revision and receiving-frame connection details. For a component intended to replace an existing part, include measured interfaces and the exact version in use. Our factory must review fit before any interchangeability is agreed.

Browse hospital bed head and foot boards and list hook seats or other metal fittings separately where needed. Use the local enquiry form to discuss the selected references or a drawing-based change.

Related hospital bed parts

Review the listed component models and confirm the selected configuration and mating interfaces with our factory.

Review the listed component models and confirm the selected configuration and mating interfaces with our factory.

Recommended Guides

Hospital Bed Parts by Assembly

Hospital Bed Parts by Assembly

Organize panel, drive and attachment components as an assembly parts list.

Read guide →

Hospital Bed Metal Parts Drawings

Hospital Bed Metal Parts Drawings

Mark the holes, mating faces and orientation of bed metal fittings.

Read guide →

YingYun hospital bed panel manufacturing workshop

Hospital Bed Parts Procurement Guide

Build a batch enquiry with component references, quantities and matching supply conditions.

Read guide →

TALK DIRECTLY WITH OUR FACTORY

Request a Factory Quote

Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.

For a custom version, include the drawing revision, material, finish and supplied condition.

lily@yingyunmic.com

YingYun — Components & OEM Inquiry

Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.