OEM Drawing Checklist
In this guide Have a drawing or a batch requirement? What to confirm Define the part and its job A useful OEM enquiry explains where the part fits and what the factory is expected to supply. For hospital bed components, identify the assembly, adjoining parts…

Define the part and its job
A useful OEM enquiry explains where the part fits and what the factory is expected to supply. For hospital bed components, identify the assembly, adjoining parts and movement or clearance requirements. A drawing of the individual component may not explain every interface.
State whether you need a component manufactured to your drawing, a change to a catalogue part or design and manufacturing review for an application. If the design is still being developed, identify the decisions that remain open so the quotation does not treat assumptions as approved requirements.
Send an identifiable drawing revision
Give each part a reference and revision. Show overall dimensions, hole positions, material and thickness. Mark the datum or reference faces used to locate critical features, and provide mating-part information when fit depends on the surrounding assembly. If your drawings leave finishing or assembly to the receiving factory, use the semi-finished parts supply solution to define the required handover stage.
State required tolerances on the drawing instead of requesting a general precision level. Our factory must review whether the requirements can be achieved for the proposed material, process and batch. Do not assume a tolerance from a similar photograph or a previous unrelated part.
If both 2D drawings and 3D models are supplied, identify which document controls the order and explain any differences. A clear PDF is useful for the first review; CAD files can be sent by email when needed.
Explain the sample and supply condition
For sample-based enquiries, provide photographs, measured dimensions and the sample quantity available for review. Point out any features that should change. A worn or previously assembled sample may not represent the dimensions or surface condition required for new production.
Specify whether the deliverable is a stamped or formed component, an unfinished part, a welded subassembly or a finished item. Identify threaded features, joining requirements and any parts supplied by your own factory. Confirm the included operations before comparing prices.
Define acceptance evidence
Describe the fit checks, dimensional records or other acceptance information you need with the order. If your project has a material or compliance requirement, name the document and its required scope. Availability must be confirmed for the actual part and order.
Define how a sample or first batch will be reviewed and who approves the drawing revision before repeat production. A sample review should resolve the agreed dimensions, interfaces and supplied condition; it should not leave conflicting documents in circulation.
Make the quotation comparable
Provide the initial quantity and expected repeat-order requirement, if known. Ask the quotation to distinguish any tooling or sample scope from the unit supply scope where applicable. State the destination and preferred packing requirements so these can be discussed with the factory.
For custom hospital bed parts, send the enquiry through the OEM/ODM service page. For standalone hardware or sheet metal parts in another industry, use custom metal fabrication. Both routes begin with your drawing or sample requirements rather than an assumed standard specification.
Sample review before batch production
For hospital bed parts sample approval, tie the sample to a controlled drawing revision, material requirement and included-part list. Identify the mating assembly used for fit review and record any agreed changes before repeat production. A sample photograph by itself does not resolve an unclear hole position or supplied condition.
Keep the initial sample scope separate from the batch requirement where they differ. State the review and acceptance information needed, identify who approves changes and confirm the version to be manufactured. Existing components can be selected from the hospital bed parts catalogue; the drawing guide for metal fittings covers mechanical interfaces.
TALK DIRECTLY WITH OUR FACTORY
Request a Factory Quote
Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.
For a custom version, include the drawing revision, material, finish and supplied condition.
Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.


