YingYun Hardware · Component manufacturing

Hospital Bed Parts

Hospital bed parts and semi-finished components for medical equipment manufacturers and bed assembly factories. Source catalogue models in bulk, or send a drawing or sample for a custom component.

Bulk orders & OEM · Assembly fit checks · Prepare an enquiry

Material & specification comparison

Four-section stamped hospital bed platform panels
U-shaped hospital bed connector
Stamped mounting fitting for hospital bed assembly

Choose Your Component

Start with the part family. Each category leads to model references and individual product pages; check the selected version against your assembly drawing before requesting a quotation.

Need to identify where a part belongs? See the assembly parts guide.

Start with a Part Reference

Use the model number in your enquiry so our factory can identify the exact catalogue reference.

More panels & metal parts · More assembly accessories

How Are You Buying?

Catalogue Parts in Bulk

For an existing hospital bed component, send the model reference and required quantity. Specify the material or finish version and delivery destination so the quotation covers your actual order.

Prepare: model list, quantities, supplied condition and required delivery schedule.

Drawing or Sample OEM

For a modified or new hospital bed part, send the drawing revision or a sample reference. Our factory reviews geometry, material, finish and the manufacturing stages to be included.

Prepare: drawing, critical interfaces, material, batch quantity and sample requirements.

Hospital bed parts OEM/ODM process →

Buying for another industry? Custom hardware and sheet metal fabrication is a separate drawing-based service for applications across industries.

Compare Component Specifications

Hospital bed parts are the individual platform, mounting, movement and accessory components purchased for bed assembly. Use the catalogue family to find a reference, then turn its published information into a component-specific purchasing specification.

Component familyPublished catalogue examplesPurchasing decision
Stamped bed panelsSteel is listed on the 840 mm and 900 mm four-section references; those records list 0.8 mm and 0.9 mm respectively.Compare the named model, section layout, frame connections and supplied stage.
Metal fittingsSelected brackets and connecting parts list iron at 3 mm; the drainage hook YY-000321 separately lists zinc plating.Specify material, thickness and finish for each fitting rather than applying one record across the range.
Side railsThe catalogue includes iron, aluminium-alloy and ABS combinations, with different arrangements and set contents.Confirm the rail version, mounting points, operating envelope and included fittings.
Manual crank partsABS-and-iron, iron and stainless steel references are listed as separate components.Confirm the crank, joint, shaft and mounting scope against the actual mechanism.
CastersListed references include TPR, PP/TPR and a 304 stainless steel/TPR caster.Specify the model, wheel size, mounting interface and brake or locking version.
Head & foot boardsABS, wood-grain ABS and 304 stainless steel references are available in the current catalogue.Match the board outline and connection; confirm the pieces and fittings in the ordered set.
IV poles & standsThe current records list 201/304 stainless steel and 16/19 mm outer-tube options.State the ordered material/tube combination and confirm the receiving socket or base.

These are examples from existing product records. They do not define every variant in the family. Open the relevant category to compare named models and their listed specifications.

Build the Assembly Parts List

Organize related components by the interfaces they share. Use the receiving assembly drawing to confirm the connection. Browse our hospital bed parts solutions to identify parts and interfaces to include in the same enquiry.

Hospital bed component positions with panel supports, connecting ears, crank mounting fitting and board hooks

Platform & Support Parts

Panel sections + connecting ears, fixing parts and supports. Show the panel layout, hinges, joining positions and the required welding stage.

Manual Adjustment Parts

Cranks, universal joints and shafts + mounting seats and linkage fittings. Define each receiving connection and list separate items in the enquiry.

Frame Attachment Parts

Casters, bed-end boards and IV poles have their own mounting interfaces. Identify sleeves, hooks, seats or locking fittings as separate requirements where needed.

Use the assembly guide to prepare your list →

Specify the Supply Stage

Semi-finished hospital bed parts need a clear handover point between our manufacturing work and your assembly line. See the semi-finished parts supply solution for the fabrication, finishing and assembly details to specify before requesting a quote.

Loose Components

List each panel section or fitting with its own reference, quantity and drawing revision. Identify joining or assembly operations your factory will complete.

Defined Fabrication

For a welded or fabricated requirement, show the parts and joints included, the inspection reference and the dimensions that apply after fabrication.

Agreed Surface Condition

Specify the required surface condition for the actual material and component. Confirm whether finishing operations are included rather than assuming every catalogue photo shows the quoted finish.

Drawing review, sample requirements and the agreed supplied condition should refer to the same revision. Prepare a drawing package or review semi-finished parts requirements.

Check the Assembly Fit

A similar appearance does not establish that two parts fit the same assembly. Use the receiving frame and mating components as the reference when selecting hospital bed spare parts or new production components.

For a multi-component order, send a bill of materials with a separate reference, quantity and drawing revision for each item. Mark the matching panel, bracket, shaft or frame connection on the assembly drawing.

Read the factory sourcing guide →

Confirm Before Batch Supply

Geometry: overall dimensions, hole spacing, fixing points and mating faces.

Configuration: panel sections, rail operation, crank connection or caster locking function.

Supply stage: loose parts, welded or unwelded components, and finish as agreed.

Approval reference: controlling drawing revision and agreed sample or part specification.

YingYun stamped hospital bed panel manufacturing workshop

From Metal to Component

YingYun is a hardware manufacturer in Zhongshan, Guangdong. Our hospital bed parts work is supported by stamping and sheet metal processing, with laser cutting, CNC bending, drilling, welding and spraying in the manufacturing scope.

Define which operations your factory needs us to complete and which stages remain in your own assembly process. Material, finish and dimensional requirements are reviewed against the selected part or drawing.

See manufacturing processes →
Meet our factory →

Prepare a Parts Enquiry

1. Identify the Parts

List catalogue model numbers or attach a marked drawing. For a mixed order, provide one line per component.

2. Define the Batch

State quantities by part, the required supplied condition, destination and delivery schedule.

3. Agree the Specification

Confirm interfaces, material, finish, sample requirements and order terms with our factory before production.

Attach one PDF, JPG or PNG up to 10 MB in the form below. For CAD files, a bill of materials or multiple drawings, email lily@yingyunmic.com.

How to order →

Parts Sourcing Questions

Can I order several component types together?

Send a parts list with the model and quantity for each item. We will confirm the selected configurations, supply scope and order terms for the requested batch.

Can you manufacture from a drawing or sample?

Yes. Hospital bed component enquiries can be reviewed from a drawing or sample reference. Include the material, finish, critical dimensions and required quantity. Any sample-based dimensions need to be agreed before manufacture.

Do you supply semi-finished parts?

Semi-finished hospital bed components are part of our supply focus. State whether you need loose, welded or unwelded parts and which finishing operations are required. The supplied condition is confirmed for the actual component.

How do I confirm a replacement part?

Provide the original part reference, dimensions, mounting details and clear photographs or drawings. Select by the confirmed interface and specification; a catalogue photo alone is insufficient to establish compatibility.

What are the MOQ, price and lead time?

Request these against the selected model or drawing, quantity, material, finish and delivery destination. Custom tooling, sampling and production requirements are reviewed as part of the quotation.

TALK DIRECTLY WITH OUR FACTORY

Request a Factory Quote

Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.

For a custom version, include the drawing revision, material, finish and supplied condition.

lily@yingyunmic.com

YingYun — Components & OEM Inquiry

Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.