Home / Guides

Hospital Bed Panel Selection

In this guide Have a drawing or a batch requirement? What to confirm Start with the assembly drawing A stamped hospital bed panel is part of an assembly. Its width, section arrangement and support points must work with the frame and movement mechanism. A similar…

stamped hospital bed panels

Start with the assembly drawing

A stamped hospital bed panel is part of an assembly. Its width, section arrangement and support points must work with the frame and movement mechanism. A similar appearance or the same model reference does not establish interchangeability.

Start with your bed frame drawing, the intended panel arrangement and the position of each mounting interface. Mark fixed points, moving joints and the space needed by adjacent brackets. Include the operating configuration when requesting a quotation.

Use dimensions to shortlist a model

The catalogue includes several panel arrangements. The 840 mm four-section panel YY-5BP01 lists steel construction and 0.8 mm thickness. Its listed sections are 840 × 750 × 32 mm, 840 × 230 × 32 mm, 840 × 320 × 32 mm and 840 × 540 × 32 mm. Use the bed panel and connecting hardware solution to review the panel sections and the connecting parts before finalizing an assembly parts list.

The 900 mm four-section panel YY-4BP01 lists steel construction and 0.9 mm thickness, with sections of 900 × 750 × 32 mm, 900 × 220 × 32 mm, 900 × 330 × 32 mm and 900 × 540 × 32 mm. These are catalogue references for discussion; confirm the final dimensions and configuration against the drawing approved for your order.

The YY-2BP01 reference appears on more than one panel arrangement. Send the complete product name, required width and drawing rather than relying on that model code alone. An 820 mm four-section panel and an 840 mm single-crank panel are different configurations.

Check the interfaces around the panel

Identify hinge positions, supporting faces, bracket locations and fixing holes. Confirm how the panel joins the frame and how the drive mechanism connects to the moving sections. Include mating-part drawings where a dimension depends on another component.

Do not choose a panel by thickness alone. Material, forming geometry, support arrangement and the final assembly all affect suitability. Any load, movement or acceptance requirement needs to be stated and reviewed for the selected design; the catalogue dimensions are not a substitute for assembly verification.

Specify what the factory will supply

Some panel entries offer welded or unwelded supply. State whether the quotation should cover loose sections, joined panels or a defined subassembly. List any brackets, connectors and fasteners that must be included, and identify those that your assembly line will add.

Confirm the required surface condition, coating scope and packing arrangement. If your factory carries out welding or finishing after delivery, explain which areas need to remain suitable for that next operation. Do not assume every reference includes the same finish or accessory set.

Send a complete enquiry

Include the product link or full catalogue name, drawing revision, width and section arrangement, required quantity, supply condition and destination. For an existing assembly, provide clear photographs together with measured interfaces or a sample for review.

Use the stamped hospital bed panel category to compare the listed models. For a revised pattern or a drawing-led panel requirement, use our hospital bed parts OEM service. Our factory will confirm the manufacturing and quotation scope before an order is agreed.

840 mm and 900 mm panel references

The catalogue examples YY-5BP01 and YY-4BP01 have different listed widths and section dimensions. The 840 mm model lists 0.8 mm steel thickness; the 900 mm model lists 0.9 mm. Compare the complete section arrangement and the receiving-frame interfaces before shortlisting a model. A width or thickness alone is not a compatibility specification.

For welded or unwelded hospital bed panels, identify which operations belong in the factory supply and which your own assembly line will carry out. List loose sections, mounting parts and any defined subassembly separately. Confirm the supplied condition for the selected model and drawing revision.

Related hospital bed parts

Use the individual specifications to shortlist a reference, then confirm compatibility with your assembly.

Browse all hospital bed parts or send your drawing for review.

Recommended Guides

Hospital Bed Parts by Assembly

Hospital Bed Parts by Assembly

Organize panel, drive and attachment components as an assembly parts list.

Read guide →

Hospital Bed Metal Parts Drawings

Hospital Bed Metal Parts Drawings

Mark the holes, mating faces and orientation of bed metal fittings.

Read guide →

OEM Drawing Checklist

OEM Drawing Checklist

Prepare the drawing revision, material and interface details for component review.

Read guide →

TALK DIRECTLY WITH OUR FACTORY

Request a Factory Quote

Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.

For a custom version, include the drawing revision, material, finish and supplied condition.

lily@yingyunmic.com

YingYun — Components & OEM Inquiry

Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.