Hospital Bed Caster Selection
In this guide Have a drawing or a batch requirement? Identify the caster and the assembly Hospital bed casters, also written hospital bed castors, are selected as part of a mounting and braking arrangement. Start with the frame connection and the operating function required by…

Identify the caster and the assembly
Hospital bed casters, also written hospital bed castors, are selected as part of a mounting and braking arrangement. Start with the frame connection and the operating function required by your assembly. A wheel diameter or a similar housing photograph is not enough to identify an interchangeable component.
The catalogue includes central-locking single-wheel and twin-wheel casters, enclosed caster series and a stainless steel braked caster reference. These are different product configurations. Use the selected model and the corresponding specifications when requesting supplier quotations or bulk supply.
Central locking and individual brakes
A central-locking arrangement connects caster operation to the bed assembly through its control and linkage interfaces. An individually operated brake is controlled at the caster. Compare the function required by your design and identify the connecting parts included in the purchase scope. The central-locking caster fittings solution explains which sleeves, pedals and receiving-frame details to include for a centrally locked arrangement.
Do not assume every central-locking caster has the same operating connection or locking states. Ask our factory to confirm the selected reference, required interface and associated fittings. A central-locking sleeve, pedal or weldment is a separate mechanical part unless it is expressly included in the agreed caster supply.
Single-wheel and twin-wheel references
Single-wheel and twin-wheel hospital bed casters use different wheel arrangements. Compare their overall geometry, mounting envelope and position within your frame before choosing a version. Select by the documented configuration and assembly requirements rather than treating wheel count as a performance rating.
The catalogue name does not establish the load capacity, floor suitability or acceptance requirements of your finished bed. State any project-specific operating and inspection requirements for review. Confirm the actual wheel construction and brake arrangement against the selected product record.
Check the mounting dimensions
Your drawing should identify the stem or fitting connection, engagement dimensions, receiving tube or mounting face, and any operating interface used by the frame. Include the assembly orientation and the clearance available around the caster. Check the relevant parts together when the brake operation depends on a linkage.
Wheel size, overall height and mounting dimensions serve different purposes. Record each dimension required for the selected design. Where the catalogue information does not resolve an interface, request confirmation or provide the receiving-part drawing before committing to a batch.
Quote the complete caster requirement
List the caster reference, quantity, required configuration, mounting information and the destination for the order. Separate the caster itself from caster mounting sleeves, pedals and other metal fittings so the quotation identifies the complete supply scope.
Use our hospital bed caster category to review the existing models and prepare a line-by-line factory enquiry. For a drawing-led modification, include the revision and changes required. Sample review and any acceptance records should be agreed for the actual component and assembly.
Compare Catalogue References
The following examples use the published specification of each named product. They illustrate the information to compare before defining an assembly requirement.
| Part and model | Published specification |
|---|---|
| Central-Locking Twin-Wheel Caster Model: YY-C20/C21 | Material: TPR Supply unit: 1 piece |
| Enclosed Bed Caster Series Model: YY-C3/C10/C13 | Material: PP & TPR Brake versions: With or without brake; confirm the selected model Supply unit: 1 piece |
| 5-Inch Stainless Steel Braked Caster Model: YY-C51 | Material: 304 stainless steel & TPR Reference size: 5 inch Supply unit: 1 piece |
The central-locking twin-wheel reference, enclosed series and 5-inch stainless steel caster describe different wheel and brake configurations. YY-C51 specifically lists a 5-inch size; do not apply that size to the other references. Define the mounting dimensions and any separate locking fittings for the selected item.
TALK DIRECTLY WITH OUR FACTORY
Request a Factory Quote
Send your required quantity and drawing or part reference. Our factory will confirm the component configuration, manufacturing scope and order terms.
For a custom version, include the drawing revision, material, finish and supplied condition.
Attach one PDF, JPG or PNG file up to 10 MB. For CAD files or multiple drawings, email lily@yingyunmic.com.
We use your details to respond to this enquiry. Privacy notice.



